values.yaml 完整配置示例

以下是比较完整的 values.yaml 配置示例，可复制下来然后并根据自己需求来进行增删改：

values.yaml

controller:
  extraInitContainers:
    - name: sysctl
      image: busybox
      securityContext:
        privileged: true
      imagePullPolicy: IfNotPresent
      command:
        - sh
        - -c
        - |
          sysctl -w net.core.somaxconn=65535 # 调大链接队列，防止队列溢出
          sysctl -w net.ipv4.ip_local_port_range="1024 65535" # 扩大源端口范围，防止端口耗尽
          sysctl -w net.ipv4.tcp_tw_reuse=1 # TIME_WAIT 复用，避免端口耗尽后无法新建连接
          sysctl -w fs.file-max=1048576 # 调大文件句柄数，防止连接过多导致文件句柄耗尽
  config:
    # nginx 与 client 保持的一个长连接能处理的请求数量，默认100，高并发场景建议调高，但过高也可能导致 nginx ingress 扩容后负载不均。
    # 参考: https://kubernetes.github.io/ingress-nginx/user-guide/nginx-configuration/configmap/#keep-alive-requests
    keep-alive-requests: "1000"
    # nginx 与 upstream 保持长连接的最大空闲连接数 (不是最大连接数)，默认 320，在高并发下场景下调大，避免频繁建联导致 TIME_WAIT 飙升。
    # 参考: https://kubernetes.github.io/ingress-nginx/user-guide/nginx-configuration/configmap/#upstream-keepalive-connections
    upstream-keepalive-connections: "2000"
    # 每个 worker 进程可以打开的最大连接数，默认 16384。
    # 参考: https://kubernetes.github.io/ingress-nginx/user-guide/nginx-configuration/configmap/#max-worker-connections
    max-worker-connections: "65536"
    log-format-upstream: $remote_addr - $remote_user [$time_local] "$request"
      $status $body_bytes_sent "$http_referer" "$http_user_agent"
      $request_length $request_time [$proxy_upstream_name] [$proxy_alternative_upstream_name] $upstream_addr
      $upstream_response_length $upstream_response_time $upstream_status $req_id $host
    # nginx 日志落盘到日志文件，避免高并发下占用过多 CPU
    access-log-path: /var/log/nginx/nginx_access.log
    error-log-path: /var/log/nginx/nginx_error.log
  extraEnvs:
    - name: TZ
      value: Asia/Shanghai
  extraVolumes:
    - name: log
      emptyDir: {}
  extraVolumeMounts:
    - name: log
      mountPath: /var/log/nginx
  extraContainers:
    - name: logrotate
      image: imroc/logrotate:latest
      imagePullPolicy: Always
      env:
        - name: LOGROTATE_FILE_PATTERN # 轮转的日志文件pattern，与 nginx 配置的日志文件路径相匹配
          value: "/var/log/nginx/nginx_*.log"
        - name: LOGROTATE_FILESIZE # 日志文件超过多大后轮转
          value: "100M"
        - name: LOGROTATE_FILENUM # 每个日志文件轮转的数量
          value: "3"
        - name: CRON_EXPR # logrotate 周期性运行的 crontab 表达式，这里每分钟一次
          value: "*/1 * * * *"
        - name: CROND_LOGLEVEL # crond 日志级别，0~8，越小越详细
          value: "8"
      volumeMounts:
        - name: log
          mountPath: /var/log/nginx
  podAnnotations:
    tke.cloud.tencent.com/networks: tke-route-eni # 声明使用 VPC-CNI 网络
  resources: #  resources 里声明使用弹性网卡
    requests:
      tke.cloud.tencent.com/eni-ip: "1"
    limits:
      tke.cloud.tencent.com/eni-ip: "1"
  service:
    annotations:
      service.cloud.tencent.com/direct-access: "true" # 启用 CLB 直通
  autoscaling:
    enabled: true
    minReplicas: 1
    maxReplicas: 10
    targetCPUUtilizationPercentage: 50
    targetMemoryUtilizationPercentage: 50
    behavior: # 快速扩容应对流量洪峰，缓慢缩容预留 buffer 避免流量异常
      scaleUp:
        stabilizationWindowSeconds: 300
        policies:
          - type: Percent
            value: 900
            periodSeconds: 15 # 每 15s 最多允许扩容 9 倍于当前副本数
      scaleDown:
        stabilizationWindowSeconds: 300
        policies:
          - type: Pods
            value: 1
            periodSeconds: 600 # 每 10 分钟最多只允许缩掉 1 个 Pod
  topologySpreadConstraints: # 尽量打散的策略
    - labelSelector:
        matchLabels:
          app.kubernetes.io/name: '{{ include "ingress-nginx.name" . }}'
          app.kubernetes.io/instance: "{{ .Release.Name }}"
          app.kubernetes.io/component: controller
      topologyKey: topology.kubernetes.io/zone
      maxSkew: 1
      whenUnsatisfiable: ScheduleAnyway
    - labelSelector:
        matchLabels:
          app.kubernetes.io/name: '{{ include "ingress-nginx.name" . }}'
          app.kubernetes.io/instance: "{{ .Release.Name }}"
          app.kubernetes.io/component: controller
      topologyKey: kubernetes.io/hostname
      maxSkew: 1
      whenUnsatisfiable: ScheduleAnyway
  image:
    registry: docker.io
    image: k8smirror/ingress-nginx-controller
  admissionWebhooks:
    patch:
      image: # 默认的镜像在境内无法拉取，可替换为 docker hub 上的 mirror 镜像
        registry: docker.io
        image: k8smirror/ingress-nginx-kube-webhook-certgen
  defaultBackend:
    image: # 默认的镜像在境内无法拉取，可替换为 docker hub 上的 mirror 镜像
      registry: docker.io
      image: k8smirror/defaultbackend-amd64
  opentelemetry:
    image: # 默认的镜像在境内无法拉取，可替换为 docker hub 上的 mirror 镜像
      registry: docker.io
      image: k8smirror/ingress-nginx-opentelemetry